新闻中心

新闻中心

NEWS CENTER

Key technologies for bearing manufacturing

Modern simulation technology has developed rapidly with the widespread use of computers,The specific method of the technology is to input the load direction, size, lubrication mode, rotation speed and environmental parameters of the bearing under certain application conditions

2019

04-08

Pump bearings and seals are not wear resistant and temperature resistant solutions

Use the impeller mouth ring of polyimide carbon fiber composite material to fit the stainless steel pump casing ring; replace the original graphite bushing with the throat bushing of our material.

2019

04-08

Common repair techniques for agricultural machinery parts

(1) Adjusting the transposition method: the worn parts are exchanged for one orientation, and the parts are not worn or worn lightly.

2019

04-08

High and low temperature bearing grease

CaidonGP200-A high and low temperature bearing grease is made of complex soap thickened synthetic base oil, and added a variety of functional additives, with excellent high and low temperature performance, good wear resistance, lubricity and rust resistance, with extremely long bearings Service life. Does not dry at high temperature, does not soften and lose, and has excellent anti-wear and noise reduction ability:

2019

04-08

Automobile various parts processing technology and tools used

Most of the hole machining of the parts adopts a multi-blade composite type (blade machine clamp, insert welding combination) structure, and the grinding is replaced by reaming and squeezing. In the one-time pass process, the hole is finished

2019

04-08

Use and maintenance method for extending the service life of hydraulic piston pump

The efficiency of the hydraulic system depends mainly on the volumetric efficiency of the hydraulic pump. When the volumetric efficiency drops to 72%, routine maintenance, replacement of bearings and aging seals are required, and friction pairs that exceed the fit clearance are replaced or repaired. Get restored.

2019

04-08

< 12 > proceed page

Company Profile

More>>

Chongqing Libo Machinery Manufacturing Co., Ltd. was established in 2000. It mainly produces and manages motorcycle electric starting gear, overrunning clutch, timing sprocket, automobile gear and farming machine gear series products. 

Friendship Link

More>>

| Tel:0086-023-62840111

0086-4000238292

| Mobile: 0086-13330228729

| 邮箱：libo_jixie @163.com

| Mr Shen

Copyright©2023 Chongqing LiBoMechanical Manufacturing Co.,Ltd. All Rights Reserved

Powered by：www.300.cn 【Seo】Business license